Table of Contents
Riau Traditional House or often referred to as twin fall selaso consisting of various rooms such as large rooms for beds, cross-legged rooms, pavilions and kitchens.
This Riau Traditional House is also equipped with a traditional hall which is often used for traditional deliberations and meetings. Riau Traditional House or this twin fall is one of the traditional traditional houses in the form of a house.
Selaso fell twins also means a house that has two hallways (selaso, salaso). This traditional house has a floor lower than the middle room, where the building is always decorated with carvings.
At the top of the roof of this building there are always wooden ornaments sticking out and always decorated with carvings. This carving is always referred to as Salembayung or Sulobuyung. This symbol always symbolizes recognition of the one and only God.
Get to know Riau Traditional House
From the variety of traditional or traditional houses in Riau, there are several similarities or types of the same. In general, this house is in the form of a house on stilts which consists of a rectangular pole.
This room has stairs, doors, walls and the same arrangement of rooms and has Malay carvings such as selambayung, hanging bees etc. Riau Traditional House has several characteristics including:
Riau Traditional House Building Shapes
Riau Traditional House It consists of two crosses which are at the ends of the roof and the leg of the roof. Both of these parts are curved upwards, but the arch at the end of this roof must be stronger than the roof of the feet. The ornament on the toe is called sulo bayung and the roof of the foot is called sayok layanagan.
This house has its own meaning that connects humans and their creators. Humans have many trials that sometimes wash away and can lead people into a darker life.
The shape of the roof is scary so that the owner does not forget to worship where he can return to a holy state later on. The material used by the Riau community is rumbia leaves tied with rope or rattan to the roof bones.
While the heavy end of the roof is pinned to the roof using a nibung. This material is often used in the Riau community in order to avoid sunburn.
2. Odd Stairs
The stairs in this traditional house are usually made odd according to the height and the low of the house. The stairs that are made are usually square or round, which are usually equipped with ornamental ladders or translucent boards.
This ladder is usually located next to the house to avoid direct views of the house, but there are also those who install it in front of the house.
These steps are usually made of nibung wood or other hard wood that can withstand heat attacks. Usually the surface of this staircase begins by placing wood or hardwood next to it with a water container for washing feet for people who want to enter the house.
3. Water / Ventilation Holes
Riau Traditional House has a water hole which is often called a vent. This vent has the function of entering or removing air. This water hole takes the shape of a symmetrical or square 8, 6, 4 or circle.
4. Floors Made of Nibung Wood
This Riau Traditional House floor is made very neatly, while the kitchen part is made a little sparse. This part of the floor is made of nibung wood which is placed at the back and the bathroom is often exposed to water. The height of the floor is usually formed based on the height of the house poles in a ratio of 20cm to 60cm.
This symbol is a symbol of belief by the Malay community. Water holes are usually at the top of the doors and windows of the house. The water hole is made of sungkai wood which is usually also used for doors and windows.
In Riau Traditional House it has two plates called langsa in the kitchen which is called hot. Not all of these traditional houses are given lonteng, usually in the living room left open. With the aim that if there is a wedding the place can be placed for the wedding. The material that is often used in lonteng is a wooden board that is strong and hard like merbau, although it is thinner than the floor.
6. Trαditionαl House Door
This door has its own function which functions as the main road if there are guests in the first room, there is no need to pass by in front of the guests. The door to this traditional house can only be used by those who have the house or the closest relative.
7. Walls Thαt Αre Slanted
The walls inside this traditional house are not like other houses, inside this house is tilted 20 “to 30”. There is a sloping wall that provides aerodynamics to traditional houses located on the edge of a river or sea where the wind is quite strong.
This shape is inspired by the shape of the ship which is evident from the decoration on the leg of the wall which is similar to a boat. This wall is also affixed with jenang, to seal the sunken wall and is inserted in a straight section so that it is not transparent by wind or light. Using hard, lint-free wood, this wall is made in two layers on the inside and outside.
8. Floor end reinforcement
Bend is the boundary of a floor made of wood which cannot be continued because its function is to strengthen and fasten the ends of the floor.
Those are some of the characteristics that exist in Riau Traditional House that we can know. Riau Traditional House This is different from the current house and has many characteristics in the building. With that we can find out some of the Riau Traditional House features that are already above.
read too :